Description
Nissan Z34 370Z/V36 Skyline GKTech Super Lock Angle Kit
GKTECH Z34 370Z/V36 SUPER LOCK ANGLE KIT
The GKTECH Z34 370z/V36 Skyline angle kit is a simple, lightweight, yet super effective bolt on steering kit.
It is a bolt on kit, meaning it can be fitted and removed with no permanent modifications other than the trimming of the factory lock stop if you wish to.
With 33% faster steering these are suitable for both the dedicated drift cars whilst working equally as well for a grip/street car looking to speed your steering up.
If you own one of these vehicles, you would know the OEM steering angle on the Z/V chassis sucks! We measured them to having around 37 degrees lead wheel and even less trailing. This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering.
– 33% faster steering
– Adjustable ackerman
– Circa 60 degrees of steering lock
Vehicle Compatibility:
– Nissan Z34 370z
– Nissan V36 Skyline (RWD only)
FAQ’S
Does installing this kit require a wheel alignment?
Yes, it alters both toe so a wheel alignment will be required after installation.
Will this fit my car?
We can only confirm fitment for the vehicles listed above under “vehicle compatibility”. If your car is not listed there, then we don’t know if it will fit.
Is there anything else needed for installation?
There is not, however, in terms of the kit itself it will arrive as shown in the product photo.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product
What wheel specs are optimal?
From our test vehicles we found higher offsets (around +30 or so) were best for fitment to avoid having a huge scrub radius (particularly when running an 18″+ wheel)
Do I need to use steering rack spacers?
You do not. This steering kit does not require the use of a rack spacer (either offset or non offset).
